Streaks: the #1 problem with window cleaning
Glass isn't a passive surface — it reflects everything, including the smallest imperfection. A cloth with a single fibre of lint leaves streaks. A leftover product traces show up against the light. The challenge isn't "cleaning the glass" but doing it WITHOUT leaving a mark.
In short
- Squeegee + water + 5% vinegar + microfibre = professional formula, zero streaks.
- Never clean glass in direct sunlight: the product dries before the final pass.
- Lugano frequency: inside 1-2 months (kitchen more often), outside 3 months (pollen + lake humidity).
- Top-down movements, 2 cm overlap between passes.
- For windows above 2.5 m or full-height glazing: professional kit needed (telescopic pole + reverse osmosis).
The squeegee technique — how the pros do it
Common mistakes that produce streaks
- Newspaper: the vintage myth. Works but leaves ink that sticks to the frame edges. Microfibre is better.
- Old towel: leaves lint on glass. Only professional microfibre.
- Cleaning in sunlight: solution dries before you can squeegee. Always clean glass in shade or early morning.
- Multi-purpose spray: contains additives that leave a film (necessary for surfaces like stainless steel but terrible on glass). Avoid.
- Squeegee with worn blade: micro-cracks in the rubber drag without drying. Replace the blade every 12-18 months.
Heavily soiled or scaled glass
For balcony glazing exposed to weather, old water spots, limescale or silicone residue:
- Pre-treat with 5% citric acid (50 g per litre warm water): spray, leave 5 minutes, then squeegee normally.
- Persistent stains: baking-soda paste + water, damp microfibre, gentle circular motion.
- Silicone residue: 70% isopropyl alcohol on a cloth, then standard procedure.
When to hire a professional
Ideal frequency by zone
| Window type | Inside | Outside |
|---|---|---|
| Kitchen | 2-3 weeks | 3 months |
| Bathroom | 1 month | 6 months |
| Bedrooms and living areas | 1-2 months | 3-4 months |
| Balconies and terraces | 1 month | 2-3 months |
| Continuous glazing (Lugano centre/Paradiso, lake view) | 1 month | 1-2 months (pollen + lake humidity) |
In Lugano, lake humidity raises the outside frequency by 30-40% compared with a city away from water. It's a real factor, not marketing.
Preventive maintenance
- Always open before cleaning the inside: wipe the frames with a barely-damp cloth. Dust and pollen settle there and return to the glass at the first breeze.
- Dry frames after every rainfall: prevents permanent water marks and silicone mould.
- Wooden shutters: dry cloth + specific oil once a year (never steam — it swells the wood).
- Insect screens: small-nozzle vacuum every 3 months, disassemble and tub-wash once a year.
Perguntas frequentes
Perché i vetri rimangono con aloni dopo la pulizia?
Cause principali: prodotto rimasto sul vetro, asciugatura con carta che lascia pelucchi, lavaggio in pieno sole (asciuga troppo veloce), microfibra non pulita. Acqua + aceto al 5% + tergivetro = no aloni.
Ogni quanto pulire le finestre a Lugano?
Lato interno ogni 1-2 mesi (più la cucina). Lato esterno: ogni 3 mesi a Lugano per via del polline e del vento del lago. Su uffici e Airbnb: ogni 1-2 mesi anche esterno.
Posso usare il vapore per pulire i vetri?
Sì, soprattutto per finestre molto sporche o con incrostazioni. Il vapore + tergivetro è la combinazione professionale standard. Attenzione a non puntare il getto direttamente su silikoni e cornici dipinte.
Fontes e referências
- [1]Suva — Working at height, safety in external window cleaningSuva — acessado em 2026-05-08
- [2]ECHA — Acetic acid REACH profileEuropean Chemicals Agency — acessado em 2026-05-08
Prefere que a Angolli cuide disso?
Visita gratuita em Lugano e em todo o Cantão de Ticino, orçamento em 24 h, produtos certificados, equipe segurada.
